POWERBLOQ 1100 24V

CANBus-enabled Battery Pack Li-Ion 25.6 V / 43.0 Ah / 1101 Wh

  • Fast charging, up to 1.5C (20%-80% in 24 minutes)
  • Up to 80% of initial capacity after 6.000 cycles (70% DOD)
  • State of the art LFP cell technology
  • High discharge perfomance
  • IEC62619 and UL2271 certified
  • CANopen communication for host and charger integration
  • Scalable capacity from 21.5Ah to over 600Ah by connecting up to 30 batteries in parallel
  • Integradet LED State of Charge (SoC) and State of Health (SoH) indicator
  • IP65 ruggedized housing
  • JEITA charging profile optimization
  • Numerous and redundant safety features
  • Easy to handle
  • No development costs, fast time-to-market

더 많은 정보를 찾고 계십니까?

Downloads POWERBLOQ 1100 24V

POWERBLOQ 1100 24V

General
Delivery Status Battery Capacity< 30%
Compliance InformationCE / IEC62619 / UL2054 / UL2271 / CAN ICES-003 (B) / NMB-003 (B) / FCC / ICES / UKCA / KC / UN38.3 / RoHS / REACH
Operating Temperature0°C to 45°C (charge)
-20°C to 60°C (discharge)

Storage Temperature

-20°C to 60°C max.
0°C to 25°C recommended

Communication Interface

CANBus: CANopen implementation according CiA418

P/N

110386

Each battery has an individual serial number (S/N), which is located on the hardpack label for tracking & traceability.

Electrical Parameters

Nominal Voltage

25.6V

Nominal (Rated) Capacity

43Ah

Standard Charge Current63A (not for cycle life)
Maximum Charge Current 63A (not for cycle life)
Discharge Current129A/10s

*Capacitive loads may cause brief inrush current peaks during connection or start-up.
Suitable inrush current limitation must be implemented in the application. For more information, please refer to www.rrc-ps.com/faq#collapse198

Dimensions

Length

330mm

Width

80mm

Thickness

230mm

Weight

~ 10.5 kg
Ingress ProtectionIP65
Safety Features
CUV (Cell Under Voltage)Protection against deep discharge
COV (Cell Over Voltage)Protection against over charge
OTC (Over Temperature in Charge)Protection against overheating while charging
OTD (Over Temperature in Discharge)Protection against overheating during discharging
OCC (Over Current in Charge)Protection against overcurrent while charging
OCD (Over Current in Discharge)Protection against overcurrent during discharging
OL (Overload in Discharge)Protection against overload during discharging
SCD (Short Circuit in Discharge)Protection against short circuits during discharging

POWERBLOQ 1100 is approved worldwide