POWERBLOQ 1100-24
CANBus-enabled Standard-Batteriepack Li-Ion 25.6V / 43.0Ah / 1101Wh
- Fast charging, up to 1.5C (20%-80% in 24 minutes)
- Up to 80% of initial capacity after 6.000 cycles (70% DOD)
- State of the art LFP cell technology
- High discharge perfomance
- IEC62619 and UL2271 certified
- CANopen communication for host and charger integration
- Scalable capacity from 21.5Ah to over 600Ah by connecting up to 30 batteries in parallel
- Integradet LED State of Charge (SoC) and State of Health (SoH) indicator
- IP65 ruggedized housing
- JEITA charging profile optimization
- Numerous and redundant safety features
- Easy to handle
- No development costs, fast time-to-market
Sie möchten weitere Informationen?
Downloads POWERBLOQ 1100-24
Produktdatenblatt POWERBLOQ 1100-24
| General | ||
|---|---|---|
| Delivery status battery capacity | < 30% | |
| Compliance information | CE / IEC62619 / UL2054 / UL2271 / CAN ICES-003(B) / NMB-003(B) / FCC / ICES / UKCA / KC / UN38.3 / RoHS / REACH | |
| Operating temperature | 0°C to 45°C (charge) -20°C to 60°C (discharge) | |
Storage temperature | -20°C bis 60°C max. | |
| Communication interface | CAN bus: CANopen implementation according to CiA 418 | |
| P/N | 110386 Each battery has an individual serial number (S/N), which is located on the hardpack label for tracking & traceability. | |
| Electrical Parameters | |
|---|---|
| Nominal voltage | 25.60V |
| Nominal (rated) capacity | 43.00Ah |
| Max. continouos charge rate | 63A (not for cycle life) |
| Continuous discharge rate | 63A (not for cycle life) |
| Peak discgarge rate | 129A/10s |
*Kapazitive Lasten können beim Anschließen oder Einschalten kurze Einschaltstromspitzen verursachen. In der Anwendung muss eine geeignete Einschaltstrombegrenzung implementiert werden. Für weitere Informationen, hier klicken.
| Battery Dimensions | |
|---|---|
| Length | 330mm |
Width | 80mm |
Thickness | 230mm |
Weight | ~ 10.5kg |
| Ingress Protection | IP65 |
| Sicherheitsfunktionen | |
|---|---|
| CUV (Cell Under Voltage) | Schutz vor Tiefentladung |
| COV (Cell Over Voltage) | Schutz vor Überladung |
| OTC (Over Temperature in Charge) | Schutz vor Überhitzung beim Laden |
| OTD (Over Temperature in Discharge) | Schutz vor Überhitzung beim Entladen |
| OCC (Over Current in Charge) | Schutz vor Überstrom beim Laden |
| OCD (Over Current in Discharge) | Schutz vor Überstrom beim Entladen |
| OL (Overload in Discharge) | Schutz vor Überlast beim Entladen |
| SCD (Short Circuit in Discharge) | Schutz vor Kurzschluss beim Entladen |
POWERBLOQ 1100 ist weltweit zugelassen
